August 24, 2018
135 attendees participate in annual NADCA/AFS Golf Tournament in Chino Hills
135 attendees participate in annual NADCA/AFS Golf Tournament in Chino Hills
March 8, 2018
Rio Hondo Country Club, Downey, CA
NADCA Chapter 30 holds its Annual Vendors Night with the local AFS Chapter. Over 130 people attended.
Laura Adams Hoppe, Capitol City Consulting (pictured below) receives the industry's Distinguished Service Award.
Rio Hondo Country Club, Downey, CA
NADCA Chapter 30 holds its Annual Vendors Night with the local AFS Chapter. Over 130 people attended.
Laura Adams Hoppe, Capitol City Consulting (pictured below) receives the industry's Distinguished Service Award.
August 25, 2017
125 golfers participate in the NADCA Chapter 30 and AFS Southern California golf tournament.
The industry luncheon drew over 140.
125 golfers participate in the NADCA Chapter 30 and AFS Southern California golf tournament.
The industry luncheon drew over 140.
April 7: 2017
NADCA member Flow3D is hosting a free webinar on May 18, 2017, 10am-11am.
The session will focus on advanced metal casting simulation. Click Here to register.
NADCA member Flow3D is hosting a free webinar on May 18, 2017, 10am-11am.
The session will focus on advanced metal casting simulation. Click Here to register.
March 9, 2017
Rio Hondo Country Club, Downey, CA
NADCA Chapter 30 holds its Annual Vendors Night with the local AFS Chapter. Over 120 people attended.
Dick Lord, Hyatt Die Casting (pictured below) receives the industry's Distinguished Service Award.
Rio Hondo Country Club, Downey, CA
NADCA Chapter 30 holds its Annual Vendors Night with the local AFS Chapter. Over 120 people attended.
Dick Lord, Hyatt Die Casting (pictured below) receives the industry's Distinguished Service Award.
August 26, 2016
Los Serranos Golf Club, Chino Hills, California
Over 130 metal casting industry participants enjoyed a full day of golf, breakfast and lunch.
Los Serranos Golf Club, Chino Hills, California
Over 130 metal casting industry participants enjoyed a full day of golf, breakfast and lunch.
May 18, 2016: 35 Bay Area attendees participate in the "State of the State" presentation from NADCA President Dan Twarog. Location: Spenger's Fish House in Berkeley.
March 10, 2016: Vendors Night Event draws over 120 attendees to Downey, CA.
James Simonelli, California Metals Coalition, is awarded 2015 NADCA 30 Distinguished Service Award
James Simonelli, California Metals Coalition, is awarded 2015 NADCA 30 Distinguished Service Award
January 12, 2016: NADCA President Dan Twarog provides a State of the Industry presentation in Commerce, CA.

March 5, 2015: Downey, CA
Over 110 attendees and 26 vendors participate in the AFS/NADCA Vendors's Night.The event was held at the Rio Hondo Country Club and Golf Course in Downey, CA.
Over 110 attendees and 26 vendors participate in the AFS/NADCA Vendors's Night.The event was held at the Rio Hondo Country Club and Golf Course in Downey, CA.

October 11, 2014: Brea, CA
Over 225 attendees and family attend the memorial for Bob Calhoun, Custom Alloy Light Metals. Bob was the current Chairman of NADCA 30 and passed away October 2, 2014.
Over 225 attendees and family attend the memorial for Bob Calhoun, Custom Alloy Light Metals. Bob was the current Chairman of NADCA 30 and passed away October 2, 2014.

August 15, 2014: Fontana, CA
Over 140 attendees participate in the annual metal casting industry golf tournament.
The tournament raises money for education scholarships, training programs, and Chapter events.

April 10, 2014: Downey, CA
NADCA's Steve Udvardy provides a State of the Industry Report to Chapter 30.
March 6, 2014: Downey, CA
111 participate in annual Vendor's Night.
January 23, 2014
The California die casting community celebrates the life of Mike Bernsen.
He received the NADCA Chapter 30 Distinguished Service award in 2003,
and was Chapter Chairman from 2001-2003.
August 23, 2013: Fontana, CA
135 participate in NADCA/AFS annual industry golf tournament.
May 17, 2013: Anaheim, CA
150 attend CMC 40th Annual Conference at Hyatt Orange County
NADCA's Dan Twarog presented as a featured industry speaker.
March 7, 2013: Downey, CA
120 attend the industry Vendor's Night
Ken Cox (Custom Alloy Light Metals) is awarded the NADCA Distinguished Service Award
Larry Larson (Rangers Die Casting) receives the NADCA Turkey Award.
October 18, 2012: Downey, CA
Stephen Udvardy presents Die Casting Defects class
July 10, 2012: Oakland, CA
NADCA Dinner Meeting: Over 30 attend NADCA's Dan Twarog presentation
June 6, 2012: Alhambra, CA:
Over 40 attend MorganMMS presentation on crucibles.
February 16, 2012: Downey, CA
120 industry members attend the 2012 Vendors Night.
Ernie Rogers (Rangers Die Casting) receives NADCA Distinguished Service Award.
Don Klements (Rangers Die Casting) receives the Turkey Award.
November 29, 2011: Santa Fe Springs, CA
NADCA Dinner Meeting: Over 40 Attend Dan Twarog's Presentation
September 9, 2011: Fontana, CA
NADCA/AFS So Cal GOLF EVENT: 118 Attendees Participate at Sierra Lakes Golf Course
February 24, 2011: Downey, CA
AFS/NADCA Vendors Night: 122 Attendees and 29 Vendor Tables Participate
Bob Dathe (A&B Die Casting) receives Distinguished Service Award.
Bob Calhoun (Custom Alloy Light Metals) receives Turkey Award.
September 10, 2010: Fontana, CA
NADCA/AFS So Cal Golf Event: 135 Attendees Participate at Sierra Lakes Golf Course
February 25, 2010: Downey, CA
133 industry members attend the 2010 Vendors Night
Mike McPhee (right) accepts the 2010 Turkey Award.
Bill Hiegel of Custom Alloy Light Metals receives the 2010 Distinguished Service Award.
Oct 29, 2009: Los Angeles, CA
Nearly 40 attend NADCA chapter dinner meeting covering the latest information on workers' compensation.
Guest panelists include Russ Gunn of Commercial Mgmt Insurance Services, Don Esparza of Zenith Insurance, Sherri Dozier of Bradford and Bathel, and Norm Hainlen of Monument Insurance.
September 11: 2009 Fontana, CA
Over 110 attend NADCA/AFS So Cal Golf
March 31, 2009 Norwalk, CA:
Governor Schwarzenegger's Small Business Advocate Marty Keller speaks at the metalworking industry quarterly political roundtable, co-hosted by NADCA Chapter 30.
Feb 19, 2009: Santa Fe Springs, CA
Leo Baran of AFS gives a preview of the 113th Casting Congress in Las Vegas in April.
Feb 19, 2009: Downey, CA
Michael Crawley and Bill Whitaker of EEAP give a presentation on Cal-OSHA compliance and how to find potential violations at your facility.
111 participate in annual Vendor's Night.
January 23, 2014
The California die casting community celebrates the life of Mike Bernsen.
He received the NADCA Chapter 30 Distinguished Service award in 2003,
and was Chapter Chairman from 2001-2003.
August 23, 2013: Fontana, CA
135 participate in NADCA/AFS annual industry golf tournament.
May 17, 2013: Anaheim, CA
150 attend CMC 40th Annual Conference at Hyatt Orange County
NADCA's Dan Twarog presented as a featured industry speaker.
March 7, 2013: Downey, CA
120 attend the industry Vendor's Night
Ken Cox (Custom Alloy Light Metals) is awarded the NADCA Distinguished Service Award
Larry Larson (Rangers Die Casting) receives the NADCA Turkey Award.
October 18, 2012: Downey, CA
Stephen Udvardy presents Die Casting Defects class
July 10, 2012: Oakland, CA
NADCA Dinner Meeting: Over 30 attend NADCA's Dan Twarog presentation
June 6, 2012: Alhambra, CA:
Over 40 attend MorganMMS presentation on crucibles.
February 16, 2012: Downey, CA
120 industry members attend the 2012 Vendors Night.
Ernie Rogers (Rangers Die Casting) receives NADCA Distinguished Service Award.
Don Klements (Rangers Die Casting) receives the Turkey Award.
November 29, 2011: Santa Fe Springs, CA
NADCA Dinner Meeting: Over 40 Attend Dan Twarog's Presentation
September 9, 2011: Fontana, CA
NADCA/AFS So Cal GOLF EVENT: 118 Attendees Participate at Sierra Lakes Golf Course
February 24, 2011: Downey, CA
AFS/NADCA Vendors Night: 122 Attendees and 29 Vendor Tables Participate
Bob Dathe (A&B Die Casting) receives Distinguished Service Award.
Bob Calhoun (Custom Alloy Light Metals) receives Turkey Award.
September 10, 2010: Fontana, CA
NADCA/AFS So Cal Golf Event: 135 Attendees Participate at Sierra Lakes Golf Course
February 25, 2010: Downey, CA
133 industry members attend the 2010 Vendors Night
Mike McPhee (right) accepts the 2010 Turkey Award.
Bill Hiegel of Custom Alloy Light Metals receives the 2010 Distinguished Service Award.
Oct 29, 2009: Los Angeles, CA
Nearly 40 attend NADCA chapter dinner meeting covering the latest information on workers' compensation.
Guest panelists include Russ Gunn of Commercial Mgmt Insurance Services, Don Esparza of Zenith Insurance, Sherri Dozier of Bradford and Bathel, and Norm Hainlen of Monument Insurance.
September 11: 2009 Fontana, CA
Over 110 attend NADCA/AFS So Cal Golf
March 31, 2009 Norwalk, CA:
Governor Schwarzenegger's Small Business Advocate Marty Keller speaks at the metalworking industry quarterly political roundtable, co-hosted by NADCA Chapter 30.
Feb 19, 2009: Santa Fe Springs, CA
Leo Baran of AFS gives a preview of the 113th Casting Congress in Las Vegas in April.
Feb 19, 2009: Downey, CA
Michael Crawley and Bill Whitaker of EEAP give a presentation on Cal-OSHA compliance and how to find potential violations at your facility.